Net user change password

Net user change password

We can change a user password from Windows command line using net user command. The command is explained below with examples.

How to change local user password

For example, if you want to reset the password for the user John on the local computer, you can run the below command. Let’s say the new password is pq12d*[email protected]

You may not want to provide the new password in the command prompt for obvious security reasons. Net use command allows to reset the password so that none around your desk can see it. You need to provide * in the place of password while executing net use command. You will be prompted to type the password and the password you enter won’t be printed on the screen. But you need to feed the password twice to make sure that you have entered the password you intended to.

How to change domain user account password

If you want to change password for a domain account, you can do it by running the below command.

Next, you will be prompted twice to enter the password and on successful completion your domain account password will be reset. You can also provide the password in the command itself as explained above.

In case the domain is not reachable then you will get the below error when you try to run the above command.

hi on my VISTA computer i get this
“System error 1355 has occurred.
The specified domain either does not exist or could not be contacted.”

Make sure that your system can contact the domain controller(DC) machine. see if ‘ping ip-of-DC’ works..
ex: ping 10.20.30.40

Any command to show the password of a user?

Nope. Only reset or add password is available via command prompt on windows. Another trick is to reset the password in seconds (such as PassMoz LabWin) and add a new password to the computer so you can know what is the password is.

when i enter in my case:
net user Stingray*; to make sure my password isn’t printed on the screen it says “The syntax of the command is: and then it gives me a whole bunch of different options. it doesn’t let me put in a password

Читайте также:  Insomnia the ark цена свободы

you should have whitespace between user name and *. The command should be
net user stingray *

“The user name could not be found.
More help is available by typing NET HELPMSG 2221.”
Is this happened because my username contains spaces (example : John’s Family) ?
What to do ?
Thanks

i have a problem after retyping the new password. It says

System error 5 has occurred.
Access is denied.

Looks like you don’t have admin privileges on the system to change password of another user.

right click command prompt and run as administrator.
or
select command prompt Ctl+Shift+Enter
the execute the command.

In this case you have to open the cmd as run administrator and try it again it will happen,

C:>net user Peter Norton Jr *
The syntax of this command is:

NET USER
[username [password | *] [options]] [/DOMAIN]
username /ADD [options] [/DOMAIN]
username [/DELETE] [/DOMAIN]
C:>NET USER ASPNET newpassword:*
System error 5 has occurred.

Access is denied.

C:>NET USER ASPNET newpassword *
The syntax of this command is:

NET USER
[username [password | *] [options]] [/DOMAIN]
username /ADD [options] [/DOMAIN]
username [/DELETE] [/DOMAIN]
this is what i m getting when trying to change password ?
help please

please run cmd as administrator.
And you can reset password.
Thanks

How can you change the password in command line and also prompt the user to change it at his next login?
I know for sure this option exists in GUI mode “User must change password at next logon”.

Following;
Any updates on this query im curious as well tia!

This cmd command worked like a charm!
Thanks

I’ve tried many times but never get changed successfully comment.

Net user TST Main VLRIPCITY

This comment goes to those who are having issues with changing passwords for user accounts that have spaces in between (James Clark, for example). The white space in between breaks down the user name into two and affects the syntax structure i.e. net user username password.therefore the line: net user James Clark 12234, is the same as: user James, password: Clark 12234. in which the user James does not exist on the computer. try an underscore between the usernames e.g. net user James_Clark 12234.

Читайте также:  Аудио драйвер для материнской платы asus

i want to know how to login using cmd with password(i have password) without changing it.

I receive an error that says the system is not authoritative for the specified account and therefore cannot complete the operation please retry the operation using the provider associated with this account. if this is an online provider please use their providers online site. This is a local account on a Windows 10 computer so I’m a bit confused.

the command net user user_name* need to verify for password complexity and this wont work if use script such as php as we need to reenter the password ,instead using net user user_name new_password will change the password without prompt

I am not a Domain Admin.
How can i change my domain user password.

Hi ALL
I have a PC on the domain…but off the network…user cannot login and i recive password reset cause cant login into VPN
Is it possible to reset domain password via cmd
or even reset the local password via cmd.
referring to cmd on automatic repair / advanced troubleshooting screen

I really need to know how to do that when running INVOKE command, error 5 previleges still.

NET USER
[username [password | *] [options]] [/DOMAIN]
username /ADD [options] [/DOMAIN]
username [/DELETE] [/DOMAIN]
username [/TIMES:]

next what i want to do dns server not authoritative for zone please guide me what i can do for the password reset.

NET USER
[username [password | *] [options]] [/DOMAIN]
username /ADD [options] [/DOMAIN]
username [/DELETE] [/DOMAIN]
username [/TIMES:]

I keep getting this message I’m trying to change my password

NET USER
[username [password | *] [options]] [/DOMAIN]
username /ADD [options] [/DOMAIN]
username [/DELETE] [/DOMAIN]
username [/TIMES:]

I keep getting this message I’m trying to change my password

i have a problem please help me .
when i want to change my password my keyboard does’n work

NET USER
[username [password | *] [options]] [/DOMAIN]
username /ADD [options] [/DOMAIN]
username [/DELETE] [/DOMAIN]
username [/TIMES:]
I’m getting the same thing. You haven’t replied to these answers, do you not know?

Читайте также:  Арм генерация ключей казначейство 2018

I am able to change password/unlock using Active Directory utility but not able change password from command line

Have you tried with /domain, since this seems to be for a active directory account and not local one.

How can i do if my username include a point : for example Q.S ?

Смена пароля проста в Windows. Вы можете проделать путь через несколько меню параметров, чтобы изменить пароль для своей учетной записи. А что делать, если Вы являетесь сисадмином в какой-нибудь компании и вам нужно изменить пароль на 10-и учетных записях пользователей? Или же у вас большая семья, которая пользуется одним компьютером и вам нужно изменить у всех пароли? Для этого мы и разберем, как изменить пароль пользователя в Windows с помощью Командной строки (CMD).

Как изменить пароль пользователя в Windows с помощью CMD

  1. Сначала откройте командную строку администратора (при условии, что у вас есть права администратора). Для этого введите cmd в меню поиска "Пуск". Щелкните правой кнопкой мыши запись "Командная строка" и выберите "Запуск от имени администратора".
  2. Введите команду следующую и нажмите "Enter", чтобы отобразить список всех пользователей в вашей системе:

net user

net user USERNAME NEWPASS

net user "USER NAME" NEWPASS

Для дополнительной безопасности вы можете использовать немного другую команду, чтобы предотвратить появление нового пароля на экране. Введите net user USERNAME * и Windows попросит вас ввести новый пароль дважды. Однако он не появляется, когда вы печатаете, чтобы никто не увидел его поблизости. Если вы видите сообщение "Отказано в доступе", убедитесь, что вы запустили Командную строку в качестве администратора. Стандартные пользователи не могут изменить пароль для других пользователей.

В создании этой статьи участвовала наша опытная команда редакторов и исследователей, которые проверили ее на точность и полноту.

Команда контент-менеджеров wikiHow тщательно следит за работой редакторов, чтобы гарантировать соответствие каждой статьи нашим высоким стандартам качества.

В этой статье рассказывается, как в Windows изменить пароль к учетной записи администратора с помощью командной строки. Если у вас нет административного доступа к компьютеру, пароль изменить нельзя. В Mac OS X пароль можно сбросить с помощью терминала.

Ссылка на основную публикацию
Adblock detector